自動點膠機膠體粘度對產品有哪些影響？
自動配膠機膠體粘度對產品性能的影響
Effect of Colloidal Viscosity of Automatic Rubber Mixing Machine on Product Performance
在自動配膠機的滾壓過程中，膠體與液體在相鄰的液層之間存在著相應的活動。這兩層之間的碰撞阻力稱為膠體粘度。
In the rolling process of automatic rubber mixer, there are corresponding activities between colloid and liquid in the adjacent liquid layer. The collision resistance between these two layers is called colloidal viscosity.
自動點膠機膠體粘度對產品的影響:
The influence of colloid viscosity of automatic dispenser on the product:
膠體粘度對包裝精度、包裝粘結性和包裝的整體質量都關重要，因此膠體粘度是自動點膠機在包裝過程中越來越重要的參數。
Colloidal viscosity is very important to packaging accuracy, packaging cohesion and overall packaging quality. Therefore, colloidal viscosity is an increasingly important parameter in the packaging process of automatic dispensing machine.
自動配料機的使用包裝在包裝的過程中,發現每個凝膠粘度的有用的步驟來實現控制,一直是流體控制設置制造商和所有的行業努力重要課題,下一個自動配藥機制造商介紹膠體粘度異常的解決方案。
The use and packaging of automatic batching machine in the packaging process, we found that each gel viscosity useful steps to achieve control, has been an important issue for manufacturers of fluid control settings and all industries, the next automatic dispensing machine manufacturers to introduce colloidal viscosity anomaly solutions.
膠體粘度常用的步驟之一是裝配加熱器，這是所有方法中常見和快的方法之一。
One of the most common steps for colloidal viscosity is to assemble heaters, which is one of the most common and fastest methods of all.
在某些特定的包裝條件和包裝條件下，需要增加的情況下，膠體溫度要與包裝工藝相匹配。在一定的大范圍內，膠體的高溫引起脈沖降低，從而引起溫度轉變，從而保證了流體的稠度。
In some specific packaging conditions and packaging conditions, the colloid temperature should be matched with the packaging process when it needs to be increased. In a certain range, the high temperature of the colloid causes the pulse to decrease, which leads to the temperature transition, thus ensuring the consistency of the fluid.
其他需求與膠體粘度的包裝、膠體粘度和中介的操作也是一個大級別減少和修改自動配藥機在封裝過程中經常出現的拉絲后的頻率,液體自動配料機,膠機膠線的過程中封裝、比特率和粘度范圍為所有包裝產品質量影響從長遠來看,膠體的控制過程,技術有待進一步加強。
Other requirements and colloid viscosity packaging, colloid viscosity and intermediary operation are also a large-scale reduction and modification of automatic dispensing machine in the packaging process often occurs after wire drawing frequency, liquid automatic dispensing machine, glue machine in the process of packaging, bit rate and viscosity range of all packaging product quality impact in the long run. The control process and technology of colloid need to be further strengthened.
上一篇：中空玻璃打膠機耗電量怎么樣？
下一篇：雙組份打膠機對工作環境的要求！
