雙組份打膠機是由哪幾部分組成?
大多數購買雙組份打膠機的朋友都不了解打膠機設備是由那幾部分組成的主要零部件由哪些，這給大家?guī)?lái)了很多的煩惱。今天小編就寫一篇簡單的掃盲文來跟大家簡單的介紹下雙組份打膠機是由哪幾部分組成的其核心部件都由哪些。這樣無論是我們?cè)谶x購打膠機還是在日后使用的時候都能夠方便。
Most of the friends who buy the two-component glue machine do not know what the main parts of the glue machine equipment are made up of, which brings us a lot of trouble. Today, the editor will write a simple literacy to introduce to you the core components of the two-component glue machine. In this way, it will be convenient for us to choose a glue beater or use it in the future.
目前市面上常見的雙組份打膠機有三類，分別是立式雙組份打膠機、臥式雙組份打膠機和端槍式雙組份打膠機。今天小編跟大家介紹的是臥式雙組份打膠機也可以稱之為小型雙組份打膠機。
At present, there are three common types of two-component glue punches on the market, namely vertical two-component glue punch, horizontal two-component glue punch and end gun two-component glue punch. Today, Xiaobian introduced to you a horizontal two-component glue punch, which can also be called a small two-component glue punch.
臥式雙組份打膠機因其占地空間小、生產效率高以及低的特點深受廣大消費者的喜愛。目前國內大部分中空玻璃生產企業都采購并使用這套設備。
Horizontal two-component gluing machine is popular with consumers because of its small space, high production efficiency and low price. At present, most of the domestic hollow glass manufacturers have purchased and used this equipment.
臥式雙組份打膠機主要是由兩部分組成，供膠系統和打膠系統。
Horizontal two-component gluing machine is mainly composed of two parts, gluing system and gluing system.
從字面名稱上就能理解供膠系統主要是為后中空玻璃涂膠提供膠體支持的設備，該系統的好壞直接影響供膠是否穩定，假如我們的打膠機供膠不穩定會造成后的產品打膠不飽滿或者有的地方膠多有的地方膠少導致產品質量嚴重缺陷。
It can be understood from the literal name that the glue supply system is mainly the equipment which provides colloidal support for the final hollow glass coating. The quality of the system directly affects the stability of the glue supply. If the glue supply of our glue dispenser is unstable, it will cause the final product glue to be not full or the product quality to be seriously defective in some places where glue is more or less.
供膠機主要有A組份提膠泵、B組份提膠泵， A、B膠增壓裝置，高壓柱塞泵，A、B膠泵連接裝置，雙組分比例調節機構，高壓出口分流裝置，液壓控制系統，氣動控制系統及電器控制系統等組成。
The rubber supply machine mainly consists of A component rubber pump, B component rubber pump, A and B rubber booster device, high-pressure plunger pump, A and B rubber pump connection device, two-component proportional adjustment mechanism, high-pressure outlet safety diversion device, hydraulic control system, pneumatic control system and electrical control system.
供膠系統的工作流程大致如下A組份提膠由電動齒輪泵提供，經管道輸送油壓驅動的A膠高壓柱塞泵增壓。B組份提膠由氣動往復泵提供，經管道輸送油壓驅動的B組分高壓柱塞泵增壓。
The working flow of the rubber supply system is roughly as follows: component A rubber extraction is provided by the electric gear pump, which is transported through pipeline to the pressure boosting of the oil-driven high-pressure A rubber plunger pump. Component B rubber lifting is provided by pneumatic reciprocating pump, which is piped to boost the pressure of component B high pressure plunger pump driven by oil pressure.
A、B膠的體積比例由雙組分比例調節機構調整，然后，同時送入打膠機混合器，混合器由36節以上混合裝置組成，雙組份膠充分混合后到達打膠機系統，涂布于中空玻璃的邊緣進行封邊。
The volume ratio of A and B glue is adjusted by a two-component proportional adjusting mechanism, and then fed into the mixer of the glue punch. The mixer consists of more than 36 mixing devices. The two-component glue is fully mixed and then reaches the glue punch system. The glue is coated on the edge of the hollow glass for edge sealing.
打膠機系統主要進行后的打膠操作，是由PCL控制系統，以及各種光感感應器組成。操作人員將等待涂膠的中空玻璃放入制定的待打膠區域后設備自動檢測并根據操作人員所設定的參數進行全自動打膠機。如部分消費者需要進行三波打膠，設備也會自動檢測并自動進行三波打膠的操作。全程不需要人工進行干預也不需要每塊玻璃都進行設置。
The gluing machine system mainly carries out the final gluing operation, which is composed of PCL control system and various photosensitive sensors. The operator will put the hollow glass waiting to be glued into the area to be glued, then the equipment will automatically detect and carry out the automatic gluer according to the parameters set by the operator. If some consumers need three-wave gluing, the equipment will automatically detect and operate three-wave gluing. There is no need for manual intervention or for each piece of glass to be set up during the whole process.
目前新新研發的雙組份打膠機還具有全自動清洗膠管、膠頭、自動感應并判斷設備故障位置等功能極大節省了操作人員的時間。
At present, the newly developed two-component glue beater also has the functions of fully automatic cleaning rubber hose, rubber head, automatic induction and judging the location of equipment failure, which greatly saves the time of operators.
關于雙組份打膠機一些基本內容就跟大家介紹到這里，如果有什么不明白的或者有什么其他需求可以在下方留言，小編會在時間回復。
Some basic contents about the two-component glue machine are introduced here. If there is any unknown or any other needs, we can leave a message below. The editor will reply at the first time.
More information about Jinan two-component glue machine can be consulted by clicking on our official website: http://www.cxjrxx.com.
上一篇：自動點膠機膠體粘度對產品的影響
下一篇：有關雙組份打膠機的知識分享！
