雙組份打膠機的結構原理
雙組份涂膠機由A、B膠泵、氣動系統、升降機構、機架等組成。
The double component coating machine is made up of A, B glue pump, pneumatic system, lifting mechanism, frame and so on.
1、膠泵：
1, glue pump:
（1）A、B組份各設一個膠泵，在各自的氣馬達驅動下，分別作往復運動，將膠吸入并壓出。A、B膠泵分別與壓膠盤固定在一起，再與機架連接組成各自的系統。
(1) each of the A and B components is set up with a rubber pump, which is driven by the respective gas motors, and the reciprocating motion is carried out respectively, and the glue is inhaled and pressed out. The A and B glue pumps are fixed together with the press disc respectively, and then they are connected with the frame to form their respective systems.
（2）A、B組份的配比是通過比例杠桿進行調節：向里調節，B出膠量減少，向外調節，B出膠量增加。通過調節比例杠桿來控制B膠的出膠量，從而控制A、B膠的配比。
(2) the ratio of A and B components is regulated by the proportion lever: to adjust to it, the amount of B out of glue is reduced, and the amount of B is increased. By adjusting the ratio lever to control the amount of glue out of B glue, the ratio of A and B glue is controlled.
（3）出膠量：由氣源處理器控制，逆時針調節，出膠量增加，順時針調節出膠量減小。
(3) glue quantity: controlled by gas source processor, counter clockwise adjustment, increase the amount of glue, reduce the amount of glue clockwise.
濟南雙組份打膠機膠泵通過比例杠桿調節A、B膠量配比，具有操作靈活，性能穩定，調節范圍大等特點。
The double component glue pump of Ji'nan is used to adjust the ratio of A and B by proportion lever. It has the characteristics of flexible operation, stable performance and large adjustment range.
A、B組份膠泵分別設一套氣動升降機構，該升降機構分別由兩個氣缸并聯組成，并通過橫梁固定連接各自的泵體。其目的之一是將兩缸的作用力通過壓盤作用在膠面上，壓力大小由調壓閥調節，一般調整在0.3MPa左右；其二，當需要更換膠桶時，氣缸可將壓盤提起。離開膠桶，以便更換新的膠桶。
The A, B component glue pump set up a set of pneumatic lifting mechanism respectively. The lifting mechanism is composed of two cylinders in parallel, and the pump body is fixed to each other through a beam. One of its purposes is to apply the acting force of the two cylinder to the glue surface through the pressure plate. The pressure is regulated by the pressure regulating valve, generally adjusting to about 0.3MPa. Secondly, when the rubber bucket is needed, the cylinder can lift the pressure plate. Leave the glue barrel so as to replace the new rubber buckets.
本文由濟南雙組份打膠機友情奉獻,更多有關的知識請點擊:http://www.cxjrxx.com/
我們將用的技術，真誠的態度,為您提供為的服務。我們將會陸續向大家奉獻，敬請期待。
This article is from Ji'nan's two component glue making machine, giving more knowledge. Please click: http://www.cxjrxx.com, we will provide you with the most advanced technology and the most sincere attitude to provide you with the most comprehensive service. We will continue to contribute to you and look forward to it.
上一篇：告訴您灌膠機主要運用在哪些方面?
下一篇：發泡膠混膠機的特點優點
