濟南雙組份打膠機如何維護與保養
一 、濟南雙組份打膠機的日常維護保養：
1、 Daily maintenance of Jinan two-component glue applicator:
每班工作完畢后,應將機身擦拭干凈；每班工作完畢后排放油水分離器積聚油水；經常檢查氣路油霧器的潤滑油情況，保證氣動元件潤滑良好；若不連續工作需馬上膠槍中殘留膠質；工作中密切注意各壓力表讀數是否正常；每班工作完畢后,應認真填好工作日記。
After each shift, the machine body shall be wiped clean; Drain the accumulated oil and water in the oil-water separator after each shift; Regularly check the lubricating oil condition of the air circuit oil atomizer to ensure good lubrication of the pneumatic components; In case of discontinuous work, the residual glue in the glue gun shall be removed immediately; Pay close attention to whether the readings of each pressure gauge are normal during operation; After each shift is completed, the work diary shall be filled in carefully.
二、濟南雙組份打膠機的一級維護保養：
2、 First level maintenance of Jinan two-component glue applicator:
、 每周檢查機械運動件的連接情況并加潤滑脂；、每15個工作日清洗混合器一次。
Check the connection of mechanical moving parts every week and add grease Clean the mixer every 15 working days.
三、濟南雙組份打膠機的二級維護保養：
3、 Secondary maintenance of Jinan two-component glue applicator:
、每月更換油霧器、閥和主泵、配比泵的潤滑油；、每月清洗一次過濾器、針閥，檢查一次閥泄壓壓力；、每年將主泵、配比泵和輔料泵及閥清洗維護一次。
Replace the lubricating oil of the oil atomizer, safety valve, main pump and proportioning pump every month Clean the filter and needle valve once a month and check the relief pressure of the safety valve Clean and maintain the main pump, proportioning pump, auxiliary pump and safety valve once a year.
The above contents are about Jinan two-component gluing machine http://www.cxjrxx.com If you want to know more, please contact online customer service, and we will serve you wholeheartedly.
上一篇：雙組份打膠機都有哪些優勢？
下一篇：雙組份打膠機如何調試
