全自動邊框機使用期膠頭堵塞問題處理
全自動邊框機僅在涂膠速度和實際效果方面與立式涂膠機相比。目前，無論是汽車、飛機等，都已經進入了模塊化時代。全自動邊框機是模塊化的代表。機器和設備本身高度模塊化。如果某個組件出現問題，我們可以盡快處理。下面來
濟南雙組份打膠機廠家講講全自動邊框機使用期膠頭堵塞問題處理方法吧。
The automatic frame machine is only compared with the vertical gluing machine in gluing speed and actual effect. At present, both cars and airplanes have entered the modular era. Automatic frame machine is the representative of modularization. The machine and equipment itself are highly modular. If there is a problem with a component, we can handle it as soon as possible. Next, let's come to Jinan two-component gluing machine manufacturer to talk about the solution to the problem of glue head clogging during the service life of the full-automatic frame machine.
由于設計機構科學合理地增加了機械設備的自檢功能，能夠準確反映和提供維修人員常見的故障信息內容，從而導致沒有任何維修經驗的人員進行維修。從生產本身來看，由于中空玻璃生產環節的模塊化，每個生產環節可能有獨立的機器設備，相互之間沒有關聯。即使其他機械設備出現問題，也不會影響全自動邊框機的涂膠。
Since the design organization scientifically and reasonably increases the self inspection function of mechanical equipment, it can accurately reflect and provide the common fault information content of maintenance personnel, which leads to maintenance by personnel without any maintenance experience. From the perspective of production itself, due to the modularization of hollow glass production links, each production link may have independent machinery and equipment, which are not related to each other. Even if other mechanical equipment has problems, it will not affect the gluing of the automatic frame machine.
全自動邊框機具有低廉、操作方便等優點。同時，由于中空玻璃的涂膠，占用空間小，運行成本相對較低。特別適合中小型企業。缺點是與立式膠水相比，依賴程度更高。同時，生產效率不能像立式玻璃膠機那么高，但相應的還是比較劃算的。
The automatic frame machine has the advantages of low price and easy operation. At the same time, due to the gluing of insulating glass, the space occupied is small and the operating cost is relatively low. Especially suitable for small and medium-sized enterprises. The disadvantage is that it is more dependent than the vertical glue. At the same time, the production efficiency cannot be as high as that of the vertical glass glue machine, but the corresponding price is relatively cost-effective.
因為全自動邊框機從混膠倉到膠嘴很容易堵塞，所以混膠倉是黑白膠水交匯的地方。當黑白膠分離時，乙烯基會保留，但這是膠水的機會。所以乙烯基會很容易堵塞，所以混料倉是堵塞的，因為料倉是乙烯基倉，所以乙烯基會越來越多的被倉堵住，因為倉內的乙烯基會越來越多的地方都被塑料垃圾桶擋住了，這也是很多人想買卻不敢買的原因。
Because the full-automatic frame machine is easily blocked from the glue mixing bin to the glue nozzle, the glue mixing bin is the place where black and white glue meet. When the black-and-white glue is separated, the vinyl will remain, but this is an opportunity for glue. Therefore, vinyl is easily blocked, so the mixing bin is blocked. Because the bin is a vinyl bin, more and more vinyl will be blocked by the bin, because more and more vinyl in the bin will be blocked by plastic garbage cans. This is also the reason why many people want to buy but dare not buy.
注意事項：
matters needing attention:
1、使用機器前，確保電源電壓的穩定以及電路，保證機器在開機中正常運行。
1. Before using the machine, ensure the stability of power supply voltage and circuit safety, and ensure the normal operation of the machine during startup.
2、確保機器的各工件都處入原點位置，機器上沒有雜物，以免阻擋機器運行，
2. Ensure that all workpieces of the machine are at the origin position and there are no sundries on the machine to avoid blocking the operation of the machine,
3、經常給機器的滑輪處加黃油，保證門窗打膠機的滑輪潤滑，運轉時更流暢，
3. Often add butter to the pulley of the machine to ensure that the pulley of the door and window gluing machine is lubricated and runs more smoothly,
4、機器正在工作時，看看周圍的人是否在的距離，以免機器在工作時傷害到旁邊的人。
4. When the machine is working, check whether the people around are at a safe distance, so as to prevent the machine from injuring the people nearby.
一般情況下,能夠正確的使用機器，一方面能夠做好產品，另一方面也可以延長機器的使用壽命，保持機器的性能穩定持久。使用打膠機也是如此，以上便是相關內容了，如果您有什么疑問就來我們網站
http://www.cxjrxx.com咨詢吧。
In general, being able to use the machine correctly can not only make good products, but also extend the service life of the machine and maintain the stable and lasting performance of the machine. The same is true with the glue machine. The above is the relevant content. If you have any questions, please come to our website http://www.cxjrxx.com Consult.
上一篇：雙組份打膠機的選型及問題處理方法
下一篇：正確理解打膠時出現“花膠”的情況
