雙組份打膠機的運用情況分幾方面看
雙組份打膠機具有一定的保質期，由于運用環境的不同，在運用過程中或許會呈現一些問題。讓我們看一下
濟南雙組份打膠機的運用情況吧。
The two-component sealant dispenser has a certain shelf life. Due to different application environments, there may be some problems in the application process. Let's take a look at the application of Jinan two-component sealant dispenser.
1.隨著雙組份打膠機運用時間的不斷添加，該設備的密封功能不斷降低，這將導致該設備的內部氣體與外界大氣的連通，從而大大削減 保溫功能。這是很高頻率的問題。
1. With the continuous increase of the operation time of the two-component sealant, the sealing function of the equipment is continuously reduced, which will lead to the connection between the internal gas of the equipment and the external atmosphere, thus greatly reducing the insulation function. This is a high frequency problem.
2.隨著設備本身的密封功能下降，其耐壓能力將呈現下降趨勢。在這種情況下，如果來自外部的壓力太大，則很容易使外表的涂層掉落，有時甚會爆破，形成嚴峻的人員傷亡。因而，在安裝之前，您須多方面了解其抗壓功能和抗壓強度。并在運用時采取一些恰當的防護措施，這關于延長運用壽命具有很大的好處。
2. With the decline of the sealing function of the equipment itself, its pressure resistance will show a downward trend. In this case, if the external pressure is too large, the coating on the surface is easy to fall, sometimes even burst, causing severe casualties. Therefore, before installation, you must understand its compressive function and compressive strength in many aspects. In addition, some appropriate protective measures shall be taken during operation, which is of great benefit for prolonging the service life.
3.隔熱層的隔熱功能也會降低，這也是一個遍及的問題。運用雙組份打膠機時或許呈現的問題包括上述方面。可以說，這也是該職業當前需求處理的緊迫問題。
3. The thermal insulation function of the thermal insulation layer will also be reduced, which is also a widespread problem. The problems that may arise when using the two-component glue dispenser include the above aspects. It can be said that this is also an urgent problem for the current needs of the profession.
此外不同雙組份膠廠家生產的膠中雜質含量是不同的。根據實際情況，建議每兩組清洗一次組件B的過濾網和單向閥。因膠水凝固導致膠槍、管路或整機故障不在保修范圍內。還定期向各泵進油口加油，確保油霧裝置內油連續。
In addition, the content of impurities in the adhesive produced by different two-component adhesive manufacturers is different. According to the actual situation, it is recommended to clean the filter screen and check valve of component B every two groups. The failure of the glue gun, pipeline or the whole machine caused by the glue solidification is not covered by the warranty. Oil shall also be added to the oil inlet of each pump regularly to ensure continuous oil in the oil mist device.
This is the end of the application of the two-component sealant dispenser. If you have any ideas or questions, please come to our website at any time http://www.cxjrxx.com Consult!
上一篇：雙組份打膠機重要的零部件膠槍的使用
下一篇：如何做雙組份打膠機的日常的維護工作
