中空玻璃打膠機需要檢修嗎？
任何機器使用一段時間以后都會有磨損，包括人還要每年體檢呢。在機器的使用過程中我們使用的精心一些，定期來檢修一下，可以加長機器的使用壽命.
Any machine will wear and tear after using for a period of time, including people who need annual physical examination. In the process of using the machine, we use it carefully and regularly to repair it, which can prolong the service life of the machine
強制維修法這種的方法是針對于機器設備的維修日期、類別和內容預先制定具體計劃，并嚴格按計劃進行，而不管機器設備實際技術狀況如何。
The compulsory maintenance method is to make a specific plan in advance according to the maintenance date, category and content of machinery and equipment, and carry out it strictly according to the plan, regardless of the actual technical condition of machinery and equipment.
優點是便于在維修前作好充分準備，并且能夠較有用地保證中空玻璃加工設備正常運轉。該的方法適用于一定嚴格保證安 全運轉的特別重要、復雜的機器設備，如玻璃清洗機、雙組份打膠機及自動中空玻璃加工流水線上的機器設備等。
The utility model has the advantages of convenient preparation before maintenance, and can effectively ensure the normal operation of insulating glass processing equipment. This method is suitable for the very important and complex machinery and equipment which must strictly ensure the safe operation, such as glass cleaning machine, two-component glue machine and machinery and equipment on the automatic insulating glass processing line.
1、定期維修法
1. Periodic maintenance method
是據機器設備實際使用情況，參考有關維護保養周期，制定機器設備維修工作的計劃日期和大致的維修工作量。這種的方法有利于做好維修前準備工作。
According to the actual use of machinery and equipment, refer to the relevant maintenance cycle, formulate the planned date and approximate maintenance workload of machinery and equipment maintenance work. This method is conducive to the preparation before maintenance.
2、檢查后維修法
2. Maintenance after inspection
這種的方法事先規定機器設備的檢查計劃，根據檢查結果和以前的維修資料，確定維修日期和內容。這種的方法簡便易行，但掌握不好就會影響維修前的準備工作。
This method specifies the inspection plan of the machine and equipment in advance, and determines the maintenance date and content according to the inspection results and previous maintenance data. This method is simple and easy to operate, but if you don't master it well, it will affect the preparation before maintenance.
3、部分檢測法
3. Partial detection method
其特性是中空玻璃設備各零部件不在同一時間段檢測，而是按設備獨立部分，按順序分別進行檢測．每次只檢測其中部分。這種方法的優點是，由于檢測工作量分散，化整為零，因而可利用節假日或非生產時間進行檢測，可增加設備的生產時間，提高設備的利用率。
Its characteristic is that all parts of insulating glass equipment are not detected at the same time, but are detected separately according to the independent parts of the equipment and in sequence. Only one part of the equipment is detected each time. The advantage of this method is that due to the scattered detection workload, it can use holidays or non production time for detection, which can increase the production time of equipment and improve the utilization rate of equipment.
4、零部件檢測法
4. Parts inspection method
將需檢測的中空玻璃設備零部件拆下來，換上事先準備好的同樣零部件，也就是用簡單“插入”、“拉出”的方法更換零部件。這種方法的優點是可節省拆裝時間，其缺點是需一定數量的備件，占用資金多。
Remove the insulating glass equipment parts to be tested and replace them with the same parts prepared in advance, that is, simply "insert" and "pull" the parts. The advantage of this method is that it can save the disassembly time, but the disadvantage is that it needs a certain number of spare parts and takes up a lot of money.
5、同步檢測法
5. Synchronous detection method
指生產過程中在工藝上相互之間緊密聯系的多臺中空玻璃設備，安排在同一時間段內進行檢測，實現檢測同步化，以減少分散修理所占的停機時間。
It refers to a number of insulating glass equipment closely related to each other in the production process, which are arranged to be tested in the same period of time, so as to realize the detection synchronization, so as to reduce the downtime of decentralized repair.
上一篇：中空玻璃打膠機有哪些種類？
下一篇：雙組份打膠機是否可以打三層中空玻璃！
