高粘度齒輪計量泵在雙組份打膠機起到什么作用?
一 雙組份打膠機中打膠機出膠的穩定與否決定了中空玻璃的生產質量，下面就齒輪計量泵與其他型式泵的工作圖來分析。
The quality of hollow glass is determined by the stability of the glue discharging from the glue beater in a two-component glue beater. The working diagrams of the gear metering pump and other types of pumps are analyzed below.
齒輪計量泵：優科齒輪計量泵采用漸開線齒形，經變位修正，流量平緩均勻，無脈動。對于流量的調節只需調節泵的轉速即可，泵的流量于轉速成正比，調節簡單。
Gear metering pump: Youke gear metering pump adopts involute tooth shape, after modification, flow is gentle and uniform, no pulsation. For the flow regulation only need to adjust the speed of the pump can be, pump flow in direct proportion to the speed, simple regulation.
其他型式泵：（以柱塞泵為例）流量輸出是一股一股的，流量波動大，易造成出膠不均。
Other types of pumps: (take plunger pump as an example) flow output is one by one, flow fluctuations, easy to cause uneven glue.
二 泵對雙組份膠料的要求和密封方式
Two pump requirements for two component compound and sealing method.
齒輪計量泵：結構簡單，并設有專門的清污槽，泵本身對大部分雜質進行自清，泵亦可進行正反轉，進一步對雜質進行自清，大程度上避免了顆粒雜質對泵的影響。
Gear metering pump: simple structure, and has a special cleaning groove, the pump itself for most of the impurities self-cleaning, the pump can also be reversed, further impurities self-cleaning, to the greatest extent to avoid the impact of particle impurities on the pump.
其他型式泵：柱塞泵設有單向閥，單向閥對顆粒雜質比較敏感，時間長易受污染，所以對密封膠料的清潔度要求很高。在密封方面柱塞泵多采用四氟材料，長時間工作，易磨損發生滲膠現象。
Other types of pumps: plunger pump with a one-way valve, one-way valve is more sensitive to particle impurities, long time vulnerable to pollution, so the cleanliness of sealant requirements are very high. In terms of sealing, the piston pump uses fluorine material more frequently, and works for a long time.
齒輪計量泵與柱塞泵的結構原理圖
Structural schematic diagram of gear metering pump and plunger pump
三 雙組份打膠機結構方面
Three the structure of two component glue machine.
其他型式泵：使用其他型式泵時，當A、B組份壓力不均時候，在調壓過程中，液壓站會升溫。
Other types of pumps: when using other types of pumps, when the pressure of components A and B is not uniform, in the process of pressure regulation, the hydraulic station will heat up.
齒輪計量泵：應用齒輪計量泵時，由于獨特的設計使流量輸出無脈動，省去了液壓站及不必要的閥門和緩沖元件，使系統簡化，成本降低，性能提高。
Gear metering pump: When using gear metering pump, because of its unique design, the flow output does not pulsate, eliminating the hydraulic station and unnecessary valves and buffer components, so that the system is simplified, the cost is reduced, and the performance is improved.
以上的精彩內容來自：雙組份打膠機更多的詳細的精彩內容請點擊我們的網站 ：
http://www.cxjrxx.com
The above highlights are from: For more detailed highlights of the two-component dispenser, please click on our official website:
http://www.cxjrxx.com.
上一篇：雙組份打膠機的保養注意哪些？
下一篇：2018濟南天諾液壓雙組份打膠機的技術
