2018濟南天諾液壓雙組份打膠機的技術
1：HDSTO1型雙組份涂膠機主要由基料泵、固化劑泵、比例泵,基料泵升降系統、調比結構、混膠系統,氣動系統、液壓系統及電氣系統組成。 基料泵、固化劑泵及比例泵均采用特殊的高壓柱塞泵,雙向等量供料,基料泵由液壓系統驅動,固化劑泵由氣動馬達驅動。二者輔以增壓供料壓盤,充分保證高粘度流體的滿腔輸送。基料壓入并增高壓,固化劑壓入并增壓,再送比例泵。固化劑的流量由調比機構調節。二種組份嘛時送入混合器,充分混合后到達擠膠 。
1:HDSTO1 two-component gluing machine is mainly composed of binder pump, curing agent pump, proportional pump, binder pump lifting system, mixing system, pneumatic system, hydraulic system and electrical system. The binder pump, curing agent pump and proportional pump all adopt special high-pressure plunger pump, two-way equal quantity feeding, the binder pump is driven by hydraulic system, and the curing agent pump is driven by pneumatic motor. The two are supplemented by pressurized feed platen, which fully ensures the transportation of high viscosity fluid. The base material is pressed into and increased to high pressure, the curing agent is pressed into and pressurized, and then sent to the proportional pump. The flow rate of the curing agent is regulated by the adjusting ratio mechanism. When the two components are mixed into the mixer, they will be fully mixed to reach the extruder.
固化劑過濾器下端出口及混合器進料處均設朋高壓球閥,沖膠泄壓用。混合器上設有單向針閥,不便使混膠更加均勻,而且防止兩種組份互竄,將通道固化堵塞。 升降系統采用手。
A high-pressure ball valve is arranged at the outlet of the curing agent filter and the mixer inlet, and is used for pressure relief. The mixer is provided with a one-way needle valve, which is inconvenient to make the mixture more uniform, and prevents the two components from channeling each other, thus solidifying and blocking the channel. Lifting system adopts hand.
2：性能特點
2: performance characteristics
1.可調式增壓同步聯動配比機構,配比調整十分方便
1. the adjustable pressurized synchronous linkage proportioning mechanism is very convenient for adjusting proportioning.
2.針狀單向閥確保混合體不會回流,避免管內凝固
2. needle like one-way valve ensures that the mixture will not return and avoid solidification in the tube.
3.全封閉固化劑膠路系統,避免固化劑與空氣接觸而固化
3. full closed curing agent glue system to prevent curing agent from contacting with air and solidifying.
4.靈敏的高壓保護閥使操作和使用更
4. sensitive high pressure protection valve makes operation and use safer.
5.氣體增壓驅動,壓力穩定,出膠量均勻
5. pressurized gas drive, stable pressure and uniform gel output.
6.利用國際流行的靜態往復式混合器,混合更均勻
6. use the international popular static reciprocating mixer to mix more evenly.
7.主要原料:硅酮膠,聚硫膠,聚氨脂膠等 具體的你可以去。
7. main raw materials: silicone rubber, polysulfide glue, polyurethane glue, etc. you can go to the concrete.
有了
雙組份打膠機上面的小總結，希望對廣大客戶有所幫助，如果有什么不理解的或者尋求幫助的請點擊我們的網站：
http://www.cxjrxx.com或者來電咨詢，我們會盡全力為您解決
With the summary above, I hope it will be helpful to our customers. If you don't understand or ask for help, please click our official website:
http://www.cxjrxx.com or call us for advice. We will try our best to solve it for you.
上一篇：高粘度齒輪計量泵在雙組份打膠機起到什么作用?
下一篇：中空玻璃機械雙組份打膠機工藝特點
